Key Clicks, Out of Range & Vibrator
Key Click Sounds
You can set if the handset keys should give a click when pressed.
1. Press MENU, > and . Select required Profile (1 or 2) and press
2. Press > until KEY CLICK appears, then press .
3. Use < and > to either switch OFF or to increase the volume.
Press
4. Press MENU to finish.
Out of Range Tone
An out-of-range warning tone occurs when you are about to go out-of-range of the
current base station and either there is no base station to handover the call to or the
next base station already has its maximum number of calls.
1. Press MENU, > and . Select required Profile (1 or 2) and press
2. Press > until OUT of RANGE appears and then press .
Use < and > to switch ON or OFF.
3. Press
4. Press MENU to finish.
It is strongly recommended that the OUT of RANGE option is always ON.
Vibrator
You can set the handset to vibrate and ring or just vibrate or just ring (see page 7)
when an incoming call arrives.
1. Press MENU, > and . Select required Profile (1 or 2) and press
2. Press > until VIBRATOR appears, then press .
3. Use < and > to either switch ON or OFF.
4. Press
5. Press MENU to finish.
INDeX DECT 20DT Handset User's Guide
to save the setting.
to save the setting.
to save the setting.
Key Clicks, Out of Range & Vibrator - Page 9
38DHB0002UKCW - Issue 5 (12/00)
again.
again.
again.