[Pstn] Trunk Routing (Incoming Calls) - AT&T SB67030 Administrator's Manual

[PSTN] Trunk Routing (Incoming Calls)

With a PSTN Gateway, all incoming calls to a specific telephone number can go directly to a specific destination. Calls to that
phone number can be routed to an extension, Group Mailbox, or Ring Group. The Trunk Routing WebUI screen only appears if
there is a PSTN Gateway connected to the system. Route calls on the T1 Gateway through Direct Inward Dialing. See
Assignments" on page 105. If both a PSTN Gateway and a T1 Gateway are connected, then both options are available. Any
destination can have more than one trunk routed to it.
To route calls to a trunk:
Figure 138. Trunk Reservation
System Configuration
Synapse Administrator's Guide
1. Log in as administrator. See
2. Click System Settings, then Trunk Routing in the
3. Select an available Trunk from the first drop-down
4. Select a destination to Route Call to from the second
5. Click
142
on page 68.
Navigation Menu at left. The screen shown in
Figure 138 displays with the current list for trunk
routing appears.
list.
drop-down list.
to save the entry or click
to the previous screen without saving the changes.
"[T1] DID
"Log in as Administrator"
to return