Rtp Priority Queuing Configuration; Applying Rtp Priority Queuing On The Interface - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Display class information configured on the
router
Display
specified traffic behavior
Display
specified class of specified policy and
behavior associated with these classes.
Display policy configuration information
and operating condition of specified or all
interface or ATM PVC.
Display CBQ configuration information and
operating condition of specified interface,
specified PVC on specified or all interface
or ATM PVC.
Display debugging information of queue

3.7 RTP Priority Queuing Configuration

RTP priority queue configuration includes:
Apply RTP priority queuing on the interface
Configure bandwidth limitation
Display and debug RTP priority queuing configuration

3.7.1 Applying RTP priority queuing on the interface

The following command is used to apply RTP priority queue on the interface. It has no
default configuration.
Perform the following configurations in interface view.
Table 3-56 Apply RTP priority queuing on the interface
Apply RTP priority queuing on the
interface
Disable RTP priority queuing from the
interface
Operation
configuration information
configuration information
Operation
3Com Corporation
Chapter 3 Congestion Management
display
{ system-defined | user-defined }
[ tcl-name ]
display
of
{ system-defined | user-defined }
[ behavior-name ]
of display
{ system-defined | user-defined }
[ policy-name [ classifier tcl-name ] ]
display
[ interface-type
[ inbound | outbound ] [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] ]
display
[ interface-type
[ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ]
debugging qos cbq { ef | af | be }
qos rtpq start-port first-rtp-port-number
end-port
bandwidth
committed-burst-size ]
undo qos rtpq
3-35
Command
traffic classifier
traffic behavior
qos policy
qos policy interface
interface-number
qos cbq interface
interface-number
Command
last-rtp-port-number
bandwidth [ cbs