3Com 3C13636 Configuration Manual page 1447

3Com Router 3000 Ethernet Family
Configuration Guide
# Configure Bri1/0/0 PPP authentication information and the Dialer bundle to which the
interface belongs.
[3Com-Bri0/0/0] interface bri 1/0/0
[3Com-Bri1/0/0] undo dialer enable-circular
[3Com-Bri1/0/0] dialer bundle-member 1
[3Com-Bri1/0/0] ppp mp
[3Com-Bri1/0/0] link-protocol ppp
[3Com-Bri1/0/0] ppp authentication-mode pap
[3Com-Bri1/0/0] ppp pap local-user usera password simple usera
2) Configure RouterB
# Configure the dial-up ACL, local user usera, and flow control interval.
[3Com] dialer-rule 2 ip permit
[3Com] local-user usera
[3Com-luser-usera] password simple usera
[3Com-luser-usera] service-type ppp
[3Com-luser-usera] quit
[3Com] flow-interval 3
# Configure the address of the interface Dialer 0, the dial string to the remote end, MP
bundling, and PPP authentication.
[3Com] interface dialer 0
[3Com-Dialer0] ip address 100.1.1.2 255.255.255.0
[3Com-Dialer0] dialer enable-circular
[3Com-Dialer0] dialer route ip 100.1.1.1 8810148
[3Com-Dialer0] dialer route ip 100.1.1.1 8810149
[3Com-Dialer0] ppp mp
[3Com-Dialer0] ppp authentication-mode pap
[3Com-Dialer0] ppp pap local-user userb password simple userb
# Configure the interface Serial0/0/0:15.
[3Com] controller e1 0/0/0
[3Com-E1-0/0/0] pri-set
[3Com-E1-0/0/0] interface serial 0/0/0:15
# Enable C-DCC and associate with the interface Dialer 0.
[3Com-Serial0/0/0:15] dialer enable-circular
[3Com-Serial0/0/0:15] dialer circular-group 0
[3Com-Serial0/0/0:15] dialer-group 2
# Configure information on MP and PPP authentication on the interface Serial0/0/0:15.
[3Com-Serial0/0/0:15] link-protocol ppp
[3Com-Serial0/0/0:15] ppp mp
[3Com-Serial0/0/0:15] ip address 100.1.1.2 255.255.255.0
[3Com-Serial0/0/0:15] ppp authentication-mode pap
3Com Corporation
1-46
Chapter 1 DCC Configuration