Applying Priority-List Queue On The Interface - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
The default value for default queue is normal.
IV. Configuring the Length of Queue
Configure the length of each queue (i.e. the capability of queue).
Perform the following configuration in system view.
Table 3-6 Configure length of the queue
Configure Length of the queue
Recover the default length value of each
queue
The following table lists the default length of each queue.
Table 3-7 Default length of each queue
top
middle
normal
bottom

3.3.2 Applying Priority-list Queue on the Interface

Apply a group of Priority-list on the interface; to use this command repeatedly will set a
new priority-list for the same interface.
Perform the following configuration under interface view.
Table 3-8 Apply priority-list group on the interface
Apply priority-list group on the interface
Cancel using PQ on the interface
Not PQ but FIFO is employed on the interface by default.
Operation
Queue
Operation
3Com Corporation
3-11
Chapter 3 Congestion Management
Command
qos pql pql-index queue { top | middle |
normal | bottom
queue-length
undo qos pql pql-index queue { top |
middle | normal
queue-length
Length
20
40
60
80
Command
qos pq pql pql-index
undo qos pq
} queue-length
| bottom }