3Com 3C13636 Configuration Manual page 1133

3Com Router 3000 Ethernet Family
Configuration Guide
Display system logging information
on the encryption card
Display interface information on the
encryption card
Display information about the fast
forwarding cache for the encryption
cards
Enable to information, packet, SA,
command,
message
encryption card
Disable to information, packet, SA,
command,
message
encryption card
Enable
debugging on the encryption card
Disable
debugging on the encryption card
II. Clearing statistics on encryption card
If no slot ID is specified in the command, the statistics of all the encryption cards on the
router shall be cleared.
Perform the following configuration in the user view.
Table 7-35 Clear statistics on encryption card(s)
Clear statistics on encryption card
III. Deleting SA on encryption card
If no slot ID is specified in the command, the established SAs (either manually or
through IKE negotiation) of all the encryption cards on the router shall be deleted.
Perform the following configuration in user view.
Table 7-36 Delete SA
Delete SAs on the encryption card
Operation
error and other
debugging on
error and other
debugging on
V 2.41 test software
V 2.41 test software
Operation
Operation
3Com Corporation
display encrypt-card syslog [slot-id ]
display interface encrypt [slot-id ]
display encrypt-card fast-switch
debugging encrypt-card { { all | command |
the error | misc | packet | sa } [slot-id ]
undo debugging encrypt-card { { all |
command | error | misc | packet | sa}
the
[slot-id ]
debugging encrypt-card host { all | packet
| sa | command | error | misc } [slot-id ]
undo debugging encrypt-card host { all |
packet | sa | command | error | misc }
[slot-id]
reset counters interface encrypt [slot-id]
reset encrypt-card sa [slot-id ]
7-29
Chapter 7 IPSec Configuration
Command
Command
Command