Typical Ipsec Configuration Examples; Establishing Security Association Manually - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
IV. Clearing packet statistics on encryption card
You can reset all counters on the encryption card, including those for data packets, byte
counting, lost packets, failed authentication, faulty SAs, invalid SA proposals, invalid
protocols, and so on.
Perform the following configuration in user view.
Table 7-37 Clear packet statistics on encryption card
Clear packet statistics on encryption
card
V. Clearing system log on encryption card
You can clear the system log, which records all key operations to it, on the encryption
card.
Perform the following configuration in user view.
Table 7-38 Clear system log on encryption card
Clear system log on encryption card

7.4 Typical IPSec Configuration Examples

7.4.1 Establishing Security Association Manually

I. Network requirements
A security tunnel will be configured between Router A and Router B. Data flow security
protection will be setup between sub-network (10.1.1.x) represented by PC A and
sub-network (10.1.2.x) represented by PC B. Security protocol used is ESP and
encryption algorithm is DES. The authentication method is SHA1-HMAC-96.
Operation
Operation
3Com Corporation
7-30
Chapter 7 IPSec Configuration
Command
reset encrypt-card statistics [slot-id ]
Command
reset encrypt-card syslog [slot-id ]