3Com 3C13636 Configuration Manual page 1370

3Com Router 3000 Ethernet Family
Configuration Guide
Table 6-5 Define a class and enter the class view
Operation
Define a class and enter
the class view
Delete a class
Perform the following configurations in class view.
Table 6-6 Define/delete EXP domain rule of packets matched MPLS
Define exp domain rule matching
MPLS
Delete exp domain rule matching
MPLS
II. Setting the value of MPLS EXP domain
Configure the value of MPLS EXP domain and associate the class with the behavior in
the policy view. Then, the packets matching the class can be MPLS EXP
domain-labeled.
To define a traffic behavior, you should first create a traffic behavior name and then
configure attributes in the new traffic behavior name.
Perform the following configurations in system view.
Table 6-7 Define a traffic behavior and enter traffic behavior view.
Define a traffic behavior and enter traffic
behavior view.
Delete a traffic behavior
Perform the following configurations in traffic behavior view.
Table 6-8 Set the value of the MPLS EXP domain to identify a matched packet
Set the value of the MPLS EXP
domain to identify a matched packet
Delete the setting of the value of the
MPLS EXP domain
traffic classifier tcl-name [ operator { and | or } ]
undo traffic classifier tcl-name [ operator { and | or } ]
Operation
Operation
Operation
3Com Corporation
6-4
Command
Command
if-match [ not
{ mpls-experimental-value }
undo if-match [ not ] mpls-exp
Command
traffic behavior behavior-name
undo traffic behavior behavior-name
Command
remark mpls-exp mpls-experimental-value
undo remark mpls-exp
Chapter 6 MPLS QoS
] mpls-exp