Introduction
This guide provides information for those familiar with using the 1.4.x and 2.x version WS5100 switch
software who require orientation to the new WS5100 3.0 switch features and functionality.
NOTE: Screens and windows pictured in this guide are samples and can differ from actual
screens.
Documentation Set
The documentation set for the WS5100 Series Switch is partitioned into the following guides to provide
information for specific user needs.
• WS5100 System Reference Guide - describes advanced setup and configuration activities for all
facets of the the WS5100 Series Switch.
• WS5100 Installation Guide - describes the basic setup and configuration required to transition to more
advanced configuration of the switch.
• WS5100 CLI Reference - describes the Command Line Interface (CLI) and Management Information
Base (MIB) commands used to configure the WS5100 Series Switch.
• WS5100 Troubleshooting Guide - describes workarounds to known conditions the user may encounter.
Document Conventions
The following conventions are used in this document to draw your attention to important information:
NOTE: Indicate tips or special requirements.
CAUTION: Indicates conditions that can cause equipment damage or data loss.
!
WARNING! Indicates a condition or procedure that could result in
personal injury or equipment damage.
About This Guide