Postscript Setup - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
PostScript Setup
The PostScript setup menus enable you to set PostScript printing
options.
1.
Press the Offline button and press the Menu button until PS
Setup is displayed.
2.
Press the Item/Enter button to display the following options.
Enter information as required:
•
•
Xerox DocuColor 2006
7. Performing the setup from the Printer Control Panel
Print to PS ERR—Yes/No. (No is the default.) Specify
whether to print the portion of a job that processed before a
PostScript error is encountered.
Cover page—Before Job/After Job/No. (No is the default.)
Specify whether a cover page will be printed at the
beginning or end of each print job. Select Before Job or After
Job to print a page with the name of the originator, the
number of pages printed, and the status of the job.
If a PostScript error occurred and Print To PS ERR is set to
Yes, the error message will be printed on the Cover page,
along with the job status.
7–5
Advertisement
Table of Contents
