Setting Up Ipx/Spx Printing With Windows 95/98 - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
9. Installing user software in a Windows 95/98 environment
Setting up IPX/SPX printing with Windows 95/98
To print from Windows 95/98 workstations over IPX (Novell), you must
first set up IPX/SPX protocols, and then configure the printer by
selecting the IPX port type and entering the settings for the port you
use.
1.
Select the Start button, Settings, and Control Panel.
2.
Double-click the Network icon.
Ensure that an entry for IPX/SPX-compatible Protocol is listed in
the Installed Network Components section. For additional
information, refer to the Windows 95/98 documentation.
3.
Double-click the IPX/SPX-compatible Protocol icon.
9–14
Xerox DocuColor 2006
Advertisement
Table of Contents
