Xerox 2006NPC - DocuColor Color Laser User Manual page 434

23. Tools Mode
9. Press the Select button. Color selection is displayed on the Copier
Screen.
10. Using the Arrow Buttons, highlight one of the following: Y for yellow, M
for magenta, C for Cyan and B for Black. Press the Select button.
11. Using the Arrow Buttons, adjust the color density between –3 and +3 for
each of the three density levels, Low, Middle and High.
Use the up and down arrows to increase or decrease the density level. Use
the left and right arrows to switch between low, medium, and high density.
Pressing the Clear (C) button will return all color densities to 0.
12. Press the Select button. Color selection is displayed on the Copier
Screen. The new density value displays next to the appropriate color.
13. To change the density of other colors, repeat steps 10 through 12.
14. Press the Exit button. Document Type selection is displayed on the
Copier Screen.
15. To change the color density for other document types, repeat steps 8
though 14.
16. Press the Exit button. The Administrator Menu is displayed on the
Copier Screen.
17. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
18. Press the Tools button to exit Tools Mode.
23–8
Xerox DocuColor 2006