Setting Up Postscript And/Or Pcl Printing With Windows 95/98; Installing The Postscript Or Pcl Printer Driver - Xerox DocuColor DocuColor 4 User Manual

1.2
To set up the DocuColor 4 LP/CP as a PostScript printer you must install the
Adobe PostScript Printer Driver for Windows 95/98 and the PPD file. To set
up the DocuColor 4 LP/CP as a PCL printer you must install the PCL Printer
Driver and PPD file. These files are included on the User Software CD. You
must also configure a particular type of print connection between the work-
station and the DocuColor 4 LP/CP. If you are printing over a network, you
will need to configure a network connection; if you are printing directly to
the printer, you will need to configure a parallel port connection.
If autorun is enabled on your computer, the installer runs automatically when
the User Software CD is inserted in the CD-ROM drive, allowing you to specify
which files to install on your computer.
If autorun is not enabled, you can run the installer by double-clicking the
CD-ROM drive icon in My Computer, or by double-clicking the Setup.exe
file in the Installr folder on the User Software CD.
1.2.1

Installing the PostScript or PCL printer driver

Insert the User Software CD in your CD-ROM drive.
Follow the instructions on screen.
Choose the Typical, Compact, or Custom installation option.
Setting up PostScript and/or PCL
printing with Windows 95/98
1
3