Xerox 2006NPC - DocuColor Color Laser User Manual page 366

19. Performing the setup from WebSetup
In initial setup, the printer was connected to the network and an NDS
directory tree with a printer, print server and one or more print queue objects.
You can make any changes to that setup through WebSetup. To modify
NDS Setup, you may need permission to browse the NDS tree. If access to
the Print Server is restricted, you will need a login password. Only one NDS
tree can be connected.
d.
e.
19–18
Select the Enable NDS checkbox. You can now log in and
navigate an existing NDS tree.
The system administrator must create print queues in the
NDS Tree associated with the selected Print Server. The
Print Queues names must correspond with the published
direct, print, or hold queues. The server will not accept print
jobs from a print queue whose name does not correspond to
an available server queue.
Select the Change Trees button. Because you can only
have one NDS tree, select the current NDS tree and select
Remove. Select the new NDS tree and select Add.
From the Change Trees drop down list, select the tree from
the Available Trees list and the Add button. Only one tree
may be added at a time. The selected tree name will be
added to list with the tree name, printer server name, and
print queue root listed in both the NDS Configuration section
of the dialog and the in the NDS Configuration section under
the Service tab. To remove a tree, select the tree and the
Remove button.
Xerox DocuColor 2006