Gray Balance Page - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Adjusting the color
2. Gray Balance Page
1.
Press the Item/Enter button. The PRINTING GRAY BALANCE PAGE is
displayed, and after a moment the page is delivered the Printer Output
Tray.
a.
b.
2.
BEST PATCH (ROW) is displayed on the Printer Control Panel. Use the
up and down arrow buttons to enter the number of the row that
corresponds to your circled selection.
3.
Press the Item/Enter button and perform one of the following steps:
•
•
Xerox DocuColor 2006
Select the color patch that is most like the gray that surrounds the
color patches.
Circle your selection.
If you enter any number other than 0, BEST PATCH (COL) appears
on the Control Panel.
a.
Use the up and down arrow buttons to select the letter or
name of the column that corresponds to your circled selection.
b.
Press the Item/Enter button. PRINTING GRAY BALANCE
PAGE is displayed, and after a moment the page is delivered
the Printer Output Tray.
c.
Select the color patch that is most like the gray, and perform
steps 2 and 3 again.
If you enter 0, PRINT COLOR TEST YES appears on the Control
Panel.
a.
Press the Item/Enter button and, after a moment, the
Comparison Page is delivered to the output tray.
b.
Go to part 3 Comparison Page.
24. Problem Solving
24-31
Advertisement
Table of Contents
