Xerox 2006NPC - DocuColor Color Laser User Manual page 505

Network Problem Solving
Jobs sent to the parallel port do
not print.
Xerox DocuColor 2006
the Control Panel.
Did you select the DocuColor 2006
as the current Printer?
Before printing, you must select the
DocuColor 2006 as the current
Printer from your Windows computer,
Mac OS computer, or UNIX
workstation.
Make sure that the Printer is
switched on.
Someone may have turned the
Printer off, or the Automatic Power-
Off or Power Saver mode function
may have engaged.
If you are printing over an IPX
(Novell) network, verify through the
PCONSOLE utility that the job was
sent to the Novell queue and that the
queue is being used by the Printer.
Ensure that the job does not contain
a PostScript error.
Check with the operator, or use Fiery
WebSpooler to check the job status.
A job containing a PostScript error
appears in red.
To obtain information on the
PostScript error, make sure the Print
to PS Error option is set to Yes in
Printer Setup.
Ask the administrator to increase the
parallel Port Timeout in Seconds
on the Printer Control Panel.
Ask the administrator to change the
Ignore EOF Character setting on the
Printer Control Panel.
f you are printing in ASCII format
PostScript only, set Ignore EOF
Character to No; if you are printing in
Binary format PostScript, set it to
Yes.
24. Problem Solving
Continued...
24-57