Sound Preset - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
23. Tools Mode
Sound Preset
The DocuColor 2006 emits tones when it is in certain conditions. These tones
alert you when the copier/printer has reached a certain state.
The following Audio Tone options are available on the DocuColor 2006:
•
Valid Tone: An entry can be made so that a tone is produced when the
buttons of the control panel are pressed accurately.
•
Invalid Tone: An entry can be made so that a tone is produced when
copying ends abnormally, such as when paper runs out or there is a
paper or document jam.
•
Job Complete Tone: An entry can be made so that a tone is produced
when copying ends.
•
Ready Tone: An entry can be made so that a tone is produced when the
machine shifts from energy saver status to the use status.
•
Alarm CRU Tone: An entry can be made so that a tone is produced
when the toner cartridge or drum cartridge requires replacement.
Use the following procedure to change the Audio Tone settings:
1.
Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.
Using the Arrow Buttons highlight the Admin Menu option.
3.
Press the Select button. Password Input is displayed on the Copier
Screen.
4.
Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear (C) button.
5.
Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
23–16
Xerox DocuColor 2006
Advertisement
Table of Contents
