Xerox 2006NPC - DocuColor Color Laser User Manual page 493

Network Problem Solving
Message
Token Ring
Hardware not
installed or not
functioning.
Can't autodetect the
ring speed. No
device on ring.
No NDS trees found. Enable NDS
Warning! Selecting a
new NDS tree
deletes Bindery
setup.
Xerox DocuColor 2006
Setup screen
Setup>
IPX>SPX Setup)
Token Ring Setup
(Network
Setup>Service
Setup>PServer
Setup>NDS Setup)
Select NDS Tree
(Network
Setup>Service
Setup>PServer
Setup>NDS Setup)
Description and action
components are not installed,
are not installed correctly, or
are not installed in the correct
device. An unsupported Token
Ring board may be in use. Call
for support.
The Printer is trying to detect
the current ring speed, but it is
the only machine on the Token
Ring network. Connect another
machine to the Token Ring
network before connecting the
DocuColor 2006.
No NDS trees were found on
the Novell network. Ensure that
the frame types on the Printer
are properly configured.
You have previously connected
the DocuColor 2006 to a
different NDS tree. NetWise
supports only a single NDS tree
connection. To avoid a
potential conflict with the
existing tree connection, all
bindery settings will be deleted.
When the message Delete
Bindery setup and continue?
appears:
Select OK and Yes to delete
the current bindery settings.
Reenter the settings in
Bindery Setup.
Press the Menu key or select
OK and No when the
message appears to avoid
deleting the bindery settings.
Repeat NDS Setup without
changing the NDS Tree, or exit
to Bindery Setup to review the
current bindery settings.
24. Problem Solving
Continued...
24-45