10. Installing user software in a Windows 2000 environment
Installing the user software for SMB printing
Use SMB or WINS printing if you do not have a Novell network.
Printing by this method enables printing from a workstation to a
particular print connection (hold, print, or direct) on the DocuColor
2006. The following procedure assumes you have the TCP/IP protocol
and Client for Microsoft Networks installed.
To set up printing to a second or third print connection, repeat this
procedure for each and assign each printer a unique descriptive name
during the printer driver installation for subsequent identification
purposes.
1.
If the system administrator has not already done so, go to the
printer and configure the DocuColor 2006 for SMB printing.
Specify whether to install the PostScript or PCL driver. Refer to
the chapter Performing the setup from the Printer Control Panel.
2.
At the workstation, double-click the My Network Places icon to
display your network environment.
10–24
Xerox DocuColor 2006