Smb Setup - Xerox 2006NPC - DocuColor Color Laser User Manual

SMB Setup

Server Message Block (SMB) is a point-to-point file sharing and
printing protocol and the default printing method of most Windows
applications. SMB runs on top of TCP/IP and does not require IPX.
When file and printer sharing for Microsoft clients is enabled, SMB can
be run on Windows 95/98, Windows 2000, and Windows NT.
1. Press the Offline button and press the Menu button until the
Network Services Setup option is displayed.
2. Press the Item/Enter button until the Enable SMB option is
displayed. Use this option to enable network communication
using SMB.
3. At the Use Name Server screen, select Yes or No (No is the
default). Select Yes to designate a specific WINS (Name Server)
server as an SMB server.
A message prompts you to enter the IP address of the server.
4. Use the up and down arrow buttons to enter the IP address of
the desired WINS server.
A message prompts you to enter the Server Name (the default is
XEROX DC 2006).
5. Use the up and down arrow buttons to enter a name for the
printer (SMB server).
A message prompts you to enter any comment about the server.
6. Use the up and down arrow buttons to enter a comment about,
or name of the printer (SMB server), such as Production use
only. This comment will identify the printer in the Windows
Network Neighborhood. Once set, this comment will display in the
second line when the Server Comment screen is displayed. When
the printer is selected on a client machine, the server comment is
displayed under the Details section of the Server information
window.
7. Press Item/Enter to display the Domain Name option (the default
is WORKGROUP). Use the up and down arrow buttons to enter
the workgroup or domain in which you want the printer to display.
Use only uppercase letters.
Xerox DocuColor 2006
7. Performing the setup from the Printer Control Panel
7–15