Auto Mode Change - Xerox 2006NPC - DocuColor Color Laser User Manual

Docucolor 2006 user guide
Hide thumbs Also See for 2006NPC - DocuColor Color Laser:
Table of Contents

Advertisement

23. Tools Mode

Auto Mode Change

The DocuColor 2006 can enter copy mode when originals are loaded into the
Document Feeder or the platen cover is opened if the Auto Mode Change
option is set to Copy. You do not need to press the Copy button to enter copy
mode.
For further information on using the Copy button to enter copy mode, go to
the Basic Copying chapter.
Use the following procedure to access the Auto Mode Change option:
1.
Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.
Using the Arrow Buttons highlight the Admin Menu option.
3.
Press the Select button. Password Input is displayed on the Copier
Screen.
4.
Using the Numeric Keypad, enter your Administrator Password. The
numbers displays as asterisks (*).
If you make a mistake while entering a password, press the Clear (C) button.
5.
Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.
Use the Arrow Buttons to highlight the Auto Mode Change option.
7.
Press the Select button. Auto Mode Change selection is displayed on
the Copier Screen.
8.
Use the Arrow Buttons to highlight one of the following:
9.
Press the Select button. The Administrator Menu is displayed on the
Copier Screen.
10. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the Tools button to exit Tools Mode.
23–12
Off to switch the Auto Mode Change feature off. Copy mode can
only be entered by pressing the Copy button.
On to switch the Auto Mode Change feature on. The copier/printer
enters copy mode when originals are loaded into the Document
Feeder or the scanner cover is open.
Xerox DocuColor 2006

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 2006

Table of Contents