Installing Tcp/Ip And Lpr Printing (Upgrade Installation Of Windows Nt 4.0 To Windows 2000) - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Installing TCP/IP and LPR printing (upgrade installation
of Windows NT 4.0 to Windows 2000)
Before you continue, print a configuration sheet at the printer to obtain
the IP address assigned to the DocuColor 2006, as well as the Subnet
mask and gateway address, if they are used.
1.
Perform steps 1-17 of the procedure Installing the user software
for parallel port printing to install the printer driver.
When installation is complete, the Printers window is displayed
with an icon for the newly installed printer.
2.
Right-click the DocuColor 2006 icon and select Properties to
open the ppd window. Select the Ports tab to display the Printer
Ports window.
3.
Ensure that you are connected to LPT1 and select the Add Port
option to display a list of available ports.
Xerox DocuColor 2006
10. Installing user software in a Windows 2000 environment
10–13
Advertisement
Table of Contents
