Electronic Collation; Custom Output Direction - Xerox 2006NPC - DocuColor Color Laser User Manual

•
Simulation-1 (2,3,4,5...10)—Uses a custom simulation goal.
Before selecting this setting, you are required to create a new
simulation goal with ColorWise Pro Tools and link the new
simulation to one of the custom simulation names, e.g.,
Simulation-1.
•
None—Uses no simulation goal. Select this setting when the
CMYK data for your job has already been separated for your
specific printer (for example, when using the Color Management
System built into your computer to convert the CMYK data to the
color space of the printer).
Use the CMYK Simulation Method print option to specify the quality of
simulation desired: Quick or Full.
For more information, refer to the chapter Using ColorWise Pro Tools.

Electronic Collation

Use this option to specify sorting options.
•
Off—Copies of a complete job are output, uncollated into the top
tray.
•
On—Copies of a complete job are collated and output into the top
tray.

Custom Output Direction

You can specify whether a custom page size job prints with the short
edge first (SEF) or the long edge first (LEF) along the width of the
media.
To specify the output direction of a standard page size, use the
corresponding page size. Page sizes such as Letter and A4 print with
the long edge first. Page sizes that have SEF as part of their names
print with the short edge first.
Xerox DocuColor 2006
B. Print options
B–11