Unpacking The Printer - Xerox 2006NPC - DocuColor Color Laser User Manual

Unpacking the Printer

Unpacking the Printer
Read all the steps before performing this procedure. There are decisions to
make before removing the Printer from the packing.
1. Remove the four cardboard supports and the Styrofoam packing from
the top of the Printer.
2. Remove the cardboard tray from the top of the Printer and place in a
safe place, out of the way of the installation.
The cardboard tray contains the following items:
•
•
•
•
•
•
•
3. Pull the plastic wrap that is around the Printer, down around the pallet
and away from the bottom of the Printer.
4. Before lifting the Printer from the pallet, read all the Warnings and
Cautions starting below and continuing on the next page.
WARNING
The Printer weighs 153 pounds (69.5 kg) without the dry ink or print/copy
cartridges installed. ALWAYS USE FOUR PEOPLE TO LIFT THE
PRINTER.
Ensure that you keep the Printer LEVEL. Please note that the rear of the
Printer is heavier than the front.
REAR
Xerox DocuColor 2006
One Copy/Print Cartridge box
Four Dry Ink boxes (Yellow, Cyan, Magenta, and Black)
CD package containing two CDs
Getting Started Guide
Recommended Materials List
Power cord
Output Tray
1. Setting up the DocuColor 2006
FRONT
301013
1-9