Print Information Pages - Xerox 2006NPC - DocuColor Color Laser User Manual

7. Performing the setup from the Printer Control Panel

Print information pages

You can print several information and test pages at the Printer Control
Panel before you set up the printer or at other times from the Ready or
the Power Save On screen:
Print Configuration Page
Print Test Pattern
Print Job Log
Print PS Font List
Print PCL Font List
Print Menu Help
Print Test Page
1. Power on the printer and allow it to warm up.
Messages are displayed on the control panel as the printer runs
through its power-up tests.
2. From the Ready screen, press the Menu button on the printer
control panel until the message Print Pages From List is
displayed.
3. Press the Item/Enter button to display the first information page
option (the Print Configuration Page).
Press the up and down arrow buttons to see other information
page options to print. Press the Item/Enter button to print the
desired page.
The printer prints your selection.
7–16
Option
A page that gives the current device configuration
and lists the selected options for all Setup menus.
A page that includes a test pattern used for engine
diagnostic purposes.
A list of the most recently printed jobs.
A list of PostScript fonts resident on the printer.
A list of PCL fonts resident on the printer.
A one-page overview of the control panel and its
components. It includes how they work, a list of
top-level menus and a brief explanation of each
menu.
This page enables you to confirm that the printer
is properly connected. The page includes samples
of color that you can use to troubleshoot printing
problems as well as such information as printer
name, enabled network protocols and amount of
memory.
Description
Xerox DocuColor 2006