Xerox 2006NPC - DocuColor Color Laser User Manual page 365

8. To specify the Novell NetWare (PServer) options, select the
Service1 tab from the Network Setup tabs.
a.
To enable PServer mode, an IPX frame type must be selected using the
Select Frames button on the Network Services Protocol 2 tab.
b.
c.
Xerox DocuColor 2006
When the server is connected to a Novell network, select the
Enable PServer mode check box to enable the options on
this tab.
From the PServer Poll Interval drop down box, select how
often (in seconds) the Novell Print server should poll the
network for new print jobs. The polling interval is limited to a
range of 0-3600 seconds.
If your network uses NetWare 3.x or NetWare 4.x in bindery
emulation mode, select the Bindery Setup button. The
Bindery Setup button launches a Novell Setup dialog box
from which you can select the group of servers that the print
server will poll for print jobs.
From the Bindery Setup... drop down list, select a server to
add to the polling list and the Add button. The server will be
added to the Selected Servers list. To remove a server,
select the server name and the Remove button.
19. Performing the setup from WebSetup
19–17