Table of Contents
Advertisement
Page 10-94
Protocol Setups
Sets up the machine settings that correspond with the protocol
being used. For example, NetBIOS/NetBEUI, AppleTalk,
NetWare, TCP/IP.
Printer Setups
Sets up the following options on the machine:
- Banner Sheet - a cover sheet that is printed with the job.
- Start Page - specifies whether or not a startup page is
automatically printed each time the machine is powered
on.
- Job Settings - customizes the Number of Copies,
Collated Sets, Sides Printed or Image Quality features.
- Tray Settings - used to assign the default Tray Priority,
enable or disable Auto Tray Switching and specify the
Destination Tray.
NOTE: This feature is not available on the DC420 single tray
configuration.
- Media Settings - specifies the default size, type and
colour of stock used for printing documents, and specifies
the default type and colour for printing Banner Sheets and
Reports. Also enables and disables the Media Colour
Substitution for the Banner Sheet.
- Hold Job Auto Delete - used to enable or disable the
buttons displayed on the Hold Job Auto Delete screen.
When enabled the System Administrator can specify a
hold interval of between 1 and 120 hours, after which time
the job(s) will be automatically deleted.
Postscript Setups
The Postscript Setups feature allows the System Administrator
to enable or disable an error sheet for postscript printing errors.
Xerox Document Centre 440/432/420 User Guide
Advertisement
Table of Contents
