Xerox 2006NPC - DocuColor Color Laser User Manual page 159

•
Enable Novell — Yes/No. If Yes is selected, select the
Ethernet frame type used for communication between your
NetWare file server (or NetWare file servers if you connect to
more than one) and the printer:
• Auto Frame Type—Yes/No (the default is Yes). Select No
• Ethernet 802.3—Yes/No (The default is No). Select Yes to
• Ethernet 802.2—Yes/No (The default is No). Select Yes to
• Ethernet II—Yes/No (The default is No). Select Yes to
• Ethernet SNAP—Yes/No (The default is No). Select Yes to
Xerox DocuColor 2006
7. Performing the setup from the Printer Control Panel
The following options are displayed if Enable Auto IP is
set to Yes:
• Auto Gateway —Yes/No. Enables the system to
automatically search for the Gateway address.
• Enable AppleTalk —Yes/No. If Yes is selected,
automatically reboots the system and enables
AppleTalk.
•
ETH. IP Address (the default is 000.000.000.00). Use
the arrow buttons to assign the printer an Ethernet IP
address. Press Item/Enter to accept the selection.
•
ETH. Subnet Mask (the default is 000.000.000.00).
Use this option to modify the subnet mask to one of the
following values for printing with TCP/IP over Ethernet:
• 255.000.000.000 if the IP address starts with a
number less than 128
• 255.255.000.000 if the IP address is within the
number range from 128 through 191
• 255.255.255.000 if the IP address starts with a
number greater than 191
•
Gateway address (the default is 000.000.000.00). If
your network uses a gateway, type the address in the
Gateway text boxes
•
Enable AppleTalk — Yes/No (the default is Yes). If
Yes is selected, automatically reboots the system and
enables AppleTalk.
to manually determine the frame type.
enable Ethernet 802.3.
enable Ethernet 802.2.
enable Ethernet II.
enable Ethernet SNAP.
7–9