Completing The Connection; Parallel Port Printing; To Prepare The Port For Parallel Port Printing In Windows 95 - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Completing the connection
To print from Windows 95/98, ensure the following tasks have been
completed:
• Set up network servers, if any
• Set up the printer to accept print jobs from the workstation
• Configure a port on each Windows workstation for the network
Parallel port printing
Although the procedures for preparing the parallel ports in Windows 95
or 98 are similar, they are not exactly alike, so ensure that you are
using the correct procedures for your operating system.
To prepare the port for parallel port printing in Windows 95
Perform this procedure in Windows 95 only if the LPT1 port is not
currently set to ECP Printer Port.
1.
Select the Start button, Settings, and Control Panel.
2.
Double-click the System icon to display the System Properties
window.
3.
Select the Device Manager tab.
Xerox DocuColor 2006
9. Installing user software in a Windows 95/98 environment
9–7
Advertisement
Table of Contents
