Using The Software For The First Time; Configuring A Connection For Fiery Link For Windows And Macintosh Os - Xerox 2006NPC - DocuColor Color Laser User Manual

13. Installing the Fiery software for Windows and Macintosh
Ensure you complete the following:
• Read the Setup program introduction.
• Read the license agreement.
• Specify a hard disk location for the installed utility software.
• Specify a folder name for the software located on the
Programs menu. By default, the folder name is Fiery.
• Acknowledge that the software installation is complete.

Using the software for the first time

Before you can use the newly installed software, configure the
connection to the printer.
Configuring a connection for Fiery Link for Windows and
Macintosh OS
You can use Fiery Link to monitor the status of Fiery servers and view
information about the print jobs sent to them.
When you select the Edit Fiery List button, all Fiery servers on the
local subnet are displayed in the Available Fierys list in the My Fiery
List dialog box. You can specify which printer servers to connect to and
monitor from this dialog box. If the printer is not in your local subnet,
you can use Fiery Link options to manually configure a connection, or
you can perform an advanced search to locate and connect to printer
servers anywhere on the network. The following procedures describe
locating and connecting to a Printer server using manual and
advanced search methods.
Fiery Link is supported only over TCP/IP.
13–2
Xerox DocuColor 2006