About The Fiery Webspooler Window - Xerox 2006NPC - DocuColor Color Laser User Manual

About the Fiery WebSpooler window

Fiery WebSpooler is a window to view printer functions and an
interface from which you can control those functions.
The Fiery WebSpooler window is divided into three areas by Spool,
RIP, and Print status bars. When the printer receives jobs, the Fiery
WebSpooler window becomes a dynamic display, filled with the names
of jobs and their characteristics.
The Spool, RIP, and Print areas of the Fiery WebSpooler window
represent the stages of printing a job. Jobs come in at the top level
(Spool) and drop down to the Print level, unless they are held along the
way.
Job icons
Three types of icons are used for both active jobs and jobs on hold.
Icon
Printer icons
Raster icon
Job types
•
Spooled jobs—Jobs listed in the area below the Spool status bar
are PostScript files stored on the printer. These jobs were sent to
either the Print queue (white icons) or the Hold queue (yellow
icons).
•
RIPped jobs—Jobs listed in the area below the RIP status bar
are ready to print. They have already been rasterized (RIPped, or
processed for printing) and are waiting, in order, for access to the
printer. Rasterized jobs can also be held; held jobs are shown
with a yellow icon.
•
Printed jobs—Jobs listed in the area below the Print status bar
have already been printed. Printed jobs can be stored on the
printer. The number of jobs that can be stored (from 1 to 99) is
defined in Setup.
Xerox DocuColor 2006
Active Jobs
(white icons)
PostScript, PCL, or raster data
headed for printing (top) or
after printing (bottom).
PostScript, PCL, and raster
data after printing, ready for
fast reprint.
18. Using Fiery WebSpooler
Jobs on Hold
(yellow icons)
PostScript or PCL data
headed for Print and Hold or
job on Hold after printing
(Hold).
PostScript or PCL data
already rasterized and held.
18–3