24
The following list shows the types of problems identified in this chapter:
•
Jam clearance
•
Copy/print quality problems
•
Power problems
•
Printer error messages
•
Printer error codes
•
Scanner error messages
Avoiding paper jams
The following conditions cause jams in the Printer.
•
The paper guides in the paper tray are not adjusted to the size of the
paper. Refer to the
Setting up the DocuColor 2006
•
The Automatic Document Feeder (ADF) document guides are not
adjusted to the size of the documents. Refer to the
Feeder
•
Transparencies are incorrectly loaded in the Bypass Tray. Refer to the
Loading Transparencies into the Bypass Tray
•
Paper not recommended is used. Refer to the
List.
•
Whenever possible, load paper to feed long edge first.
CAUTION
DO NOT open the Duplex Tray unless directed to do so from the Printer
Control Panel. Opening the Duplex Tray at any other time could create a
paper jam.
Xerox DocuColor 2006
Loading paper in the Paper Tray
information in the
Setting up the DocuColor 2006
Problem Solving
section.
procedure.
Recommended Materials
procedure in the
Automatic Document
section.
24-1