Auditron Setup - Xerox 2101 User Manual

"8.1.3 Entering/Exiting Auditron
Mode"
8.5.4

Auditron Setup

There are two types of Auditron setup:
Auditron Mode
To switch on or off the Auditron Mode. If the Auditron Mode is switched on, the Password Entry screen will
appear when the power of the machine is switched on or after the Auditron Administrator Mode or Meter
Check screen is displayed. The use of the machine can then be controlled. Also, as a copy limit can be
specified for each account, you can control the volume of copying.
To activate the Auditron Mode, you must set the account data for all users.
"8.5.2 Create/Modify Accounts"
User Password Entry Screen Timer
You can set the time for the User Password Entry screen to be automatically displayed after the last copy
job is done. The timer can be set between 1 to 59 seconds in one second increments, or between 1 to 10
minutes in one minute increments. In addition, you can choose to disable it. Even if the timer is disabled, the
User Password Entry screen will appear if the Password button is pressed.
"8.1.3 Entering/Exiting Auditron
Mode"
4
Select Confirm to delete.
5
Select Close.
The display returns to the Auditron Menu screen.
6
Exit from the Auditron Administrator Mode.
●
Procedure
1
Display the Auditron Menu screen.
2
Select Auditron Setup.
The Auditron Setup screen is displayed.
8.5 Auditron Menu
315