Auto Start; The Copier Main Screen - Xerox 2006NPC - DocuColor Color Laser User Manual

21. Basic Copying

Auto Start

While the Please Wait message appears on the Copier Screen, you cannot
start copy operations. You may, however, program your copy job. Once the
copier/printer has successfully entered copy mode, your copy job will
automatically begin to print.
While the Please Wait message is displayed, position your originals, select
the desired options and press the Start button. The copier/printer continues
to show the Please Wait message until it enters the copy mode.
Once the DocuColor 2006 enters the copy mode, the copy job begins to print.
If you wish to cancel the copy job before it begins, press the Stop button.

The Copier Main Screen

Once the DocuColor 2006 enters the copy mode, the Copier Screen displays
the Main Screen. The message Ready to Copy appears on the Main Screen.
The Main Screen also displays the copy quantity and the settings for the
following features:
•
Reduce/Enlarge
•
Paper Supply
•
Color Mode
When you first enter copy mode, each of these features is programmed at the
factory default setting. Should you make any changes to these settings, the
Main Screen will reflect these changes.
For information on the Reduce/Enlarge feature, the Paper Supply feature and
the Color Mode feature, go to the Copy Features chapter. For information on
changing the default settings for each of these features, go to the Tools Mode
chapter.
To view any changes made to the other features available through the
DocuColor 2006 copier/printer, access the corresponding feature screen. For
information on the available features and for directions on accessing feature
screens, go to the Copy Features screen.
21–4
Xerox DocuColor 2006