Xerox 2006NPC - DocuColor Color Laser User Manual page 396

21. Basic Copying
The DocuColor 2006 detects original sizes in either inches or millimeters. The
table below lists the various paper sizes that the DocuColor 2006 can
automatically detect when configured to inches and to millimeters.
For information on changing the copier configuration between inches and
millimeters, go to the Tools Mode chapter.
You must enter a Paper Supply option for documents that do not fall within
the sizes listed in the table and for documents that are difficult to detect, such
as transparencies and tracing paper. If the copier cannot detect the size of
your original, an error message appears on the Copier Screen. The error
message appears each time you attempt to copy the original until you enter a
specific Paper Supply option.
For directions on using the Paper Supply feature, go to the Copy Features
chapter.
21–6
Inch Configuration
8.5 in. x 11 in. SEF/LEF
8.5 in. x 14 in. SEF
11 in. x 17 in. SEF
Metric Configuration
B5 SEF/LEF
A4 SEF/LEF
B4 LEF
A3 SEF
A5 LEF (EU only)
Xerox DocuColor 2006