Setting Print Options For A Postscript Job (Windows Nt 4.0) - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
14. Printing from the Windows workstations
Setting print options for a PostScript job (Windows NT 4.0)
1.
Select Print in your application.
2.
Ensure that the DocuColor 2006 PostScript printer is selected
and select Properties from the File menu.
3.
Select the Fiery Printing tab.
This tab serves as the control center for all frequently used
printing functions.
4.
Select the Paper Source print option bar.
a.
b.
c.
For more information on these and other print options, refer to the
chapter Print options.
If paper loaded in the selected tray is a different size, orientation, and/or
media type than that of the job you are sending, the printer displays an error
message and the job might not print. Load the correct paper in the selected
tray or cancel the job.
14–16
In the Page Size area, specify the paper size for the job.
In the Paper Source area, select the paper tray for the job.
In the Media Type area, select the type of media to use for
the job.
Xerox DocuColor 2006
Advertisement
Table of Contents
