Installing Additional Software For Windows 2000 - Xerox 2006NPC - DocuColor Color Laser User Manual

Installing additional software for Windows 2000

You can copy additional color files from the User Software CD to your
hard disk. Many of the files are PostScript files that you can download
and print using WebDownloader.
• ICM folder—ICM monitor setting file and device profiles specially
designed for use with the Fiery and particular copier models.
• Clrfiles folder (inside English folder)—Cmyk.ps, an 11-page, letter-
size PostScript file to use for reference when defining CMYK colors
in applications. Pantone.ps, a 19-page, letter-size PostScript file
that indicates the closest equivalent of PANTONE coated colors
that the Fiery and your particular printer can produce. The method
used to print the Pantone.ps file differs depending on the Spot
Color Matching setting.
You can print Rgb_01.doc from Microsoft Word 97 or later to view
RGB colors. You can print Rgb_02.ppt from PowerPoint 6.0 or
later to view available RGB colors.
• Calibrat folder (inside English/Clrfiles folder)—Four PostScript
measurements files of color patches: Custom21.ps, Custom34.ps,
Stand21.ps, and Stand34.ps. The numbers in the file names refer
to the number of patches on the page. The Custom files are
provided to enable you to download measurement patches that
incorporate the current calibration set of the printer. The Standard
files are provided to enable you to download standard
measurement patches that ignore the current calibration set for the
printer.
These files are provided for expert users and should not be used for day-to-
day calibration.
Xerox DocuColor 2006
10. Installing user software in a Windows 2000 environment
10–31