Adding Memory To The Printer - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Adding memory to the Printer
Adding memory to the Printer
You will need a phillips head screwdriver to perform this procedure.
CAUTION
•
Protect the memory card from static electricity by keeping it in the anti-
static bag until you are ready to install it.
•
Handle the card by the top or side edges only. Do not touch the card
components or the gold connector edge.
•
Avoid placing the card near magnetic devices, such as a pc monitor.
•
Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
1.
Switch OFF the power to the Printer and to the Scanner.
2.
Remove the three screws from the upper right-hand side panel of the
Printer.
Xerox DocuColor 2006
0
301073A-WOL
1. Setting up the DocuColor 2006
301186
301083
1-73
Advertisement
Table of Contents
