Setting Up The 2 Tray Module - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Installing the 2 Tray Module
Setting up the 2 Tray Module
To install the 2 Tray Module, perform the following steps.
WARNING
You will need at least two people to remove it from the carton.
1.
Open the 2 Tray Module carton.
2.
Remove the styrofoam and the plastic wrap from the top of the 2 Tray
Module.
3.
With a person on each side of the box, grasp the crossbars in the
locations indicated by the labels.
4.
Lift the 2 Tray Module from the box and place it the selected location.
5.
Lock the front casters as shown below.
Xerox DocuColor 2006
1. Setting up the DocuColor 2006
0301098a
0
301007B-WOL
1-5
Advertisement
Table of Contents
