Xerox 2006NPC - DocuColor Color Laser User Manual page 432

23. Tools Mode
Use the following procedure to change a Defaults for Copy setting:
1. Press the Tools button on the Copier Control Panel to display the Tools
Main Menu on the Copier Screen.
2. Using the Arrow Buttons highlight the Admin Menu option.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4. Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering the password, press the Clear (C)
button.
5. Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6. Use the Arrow Buttons to highlight the Defaults for Copy option.
7. Press the Select button. Defaults for Copy selection is displayed on the
Copier Screen.
8. Using the Arrow Buttons, highlight the feature whose defaults you wish
to change.
9. Press the Select button. The feature selections are displayed on the
Copier Screen.
10. Use the Arrow Buttons to highlight a new default setting.
To change the default for the Erase feature, you must enter an erase
measurement using the Numeric Keypad. If you enter a wrong number,
press the Clear button (C) and enter the correct number.
11. Press the Select button. Defaults for Copy selection are displayed on
the Copier Screen. The new default setting displays next to the
appropriate feature.
12. To change the default for another feature, repeat steps 8 through 11.
13. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
14. To exit Tools Mode, press the Tools button.
23–6
Xerox DocuColor 2006