Comparison Page - Xerox 2006NPC - DocuColor Color Laser User Manual

24. Problem Solving

3. Comparison Page

The Comparison Page allows you to see the changes you that made during
the VisualCal adjustment. On the page are four rows of color photographs.
The first row and the third row show the color setup before you selected
VisualCal. Row two and row four show the color setup after the VisualCal
adjustment was completed. Now you must decide which setup is preferred.
Perform one of the following steps:
•
If you are satisfied with your adjustments press the Item/Enter button.
VISUALCAL appears on the Control Panel.
The system saves your changes and after a moment READY is
displayed.
•
If you are not satisfied with your adjustments, press the down arrow
button and ensure that "No" is displayed on the Control Panel.
a.
b.
To adjust the Scanner Color, refer to the section
Tools Mode
24-32
Press the Item/Enter button. APPLY CHANGES DEFAULT
COLOR appears on the Control Panel.
Press the Item/Enter button again. The system erases your
adjustments and returns to the color default settings. After a
moment READY is displayed.
chapter.
Adjusting the color
Auto Color Adjust in the
Xerox DocuColor 2006