Using The Output Option - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
22. Copy Features
Using the Output option
Use the following procedure to make a copy using the Output option:
1.
If the DocuColor 2006 is in printer mode, press the Copy button to enter
copy mode.
2.
Press the Clear All button to restore default settings.
3.
Position the original on the Document Glass or in the Document Feeder.
For more information on position originals on the Document Glass and using
the Document Feeder, go to the Basic Copying chapter.
4.
Press the Advanced Features button. Advanced Features selection is
displayed on the Copier Screen.
5.
Use the Arrow Buttons to highlight the Output option.
6.
Press the Select button. Output Destination selection is displayed on the
Copier screen.
7.
Use the Arrow Buttons to highlight one of the following:
•
•
•
8.
Press the Select button. Advanced Features selection is displayed on
the Copier Screen.
9.
Press the Exit button. The Main Screen is displayed on the Copier
Screen.
10. Enter your desired number of copies using the Numeric Keypad.
11. Press the Start button.
22–20
Exit Tray to direct output to the printer side output tray.
Top Tray to direct output to the printer top output tray.
Sort/Stack selections if option is enabled. Refer to the section
Determining Output with the optional Sorter/Stacker.
Xerox DocuColor 2006
Advertisement
Table of Contents
