Adding Memory To The Scanner - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Adding memory to the Scanner
Adding memory to the Scanner
The Scanner memory card enables 2-Side copying.
You will need a flat blade screwdriver to perform this procedure.
CAUTION
Protect the memory card from static electricity by keeping it in the anti-
static bag until you are ready to install it.
Handle the card by the top or side edges only. Do not touch the
memory card components or the gold connector edge.
Avoid placing the memory card near magnetic devices, such as a pc
monitor.
Avoid exposing the memory card to direct sunlight, high temperatures,
or humidity.
1.
Switch OFF the power to the Scanner.
2.
Locate the access cover on the left side of the Scanner.
Xerox DocuColor 2006
1. Setting up the DocuColor 2006
301125
301219a
1-79
Advertisement
Table of Contents
