B. Print options
Print option override hierarchy
Print options can be overridden in the following cases:
•
Application settings will override the Printer Setup and ColorWise
Pro Tools settings
•
Settings made from the Fiery WebSpooler will override user
printer driver settings
Default settings
In the following table, underlined settings in the Option and settings
column indicate default printer driver settings (PPD/PDD defaults). If
you do not use the printer driver interface to configure a particular
option, the DocuColor 2006 prints the job with the default setting.
For options that can be configured during Setup from the Control
Panel, WebSetup, or ColorWise Pro Tools selecting Printer default
results in a print job that uses the Setup settings. For options that
cannot be configured during Setup, the DocuColor 2006 prints the job
with a pre-configured printer default setting. Some options are not
supported by various operating system. For more information, refer to
the Requirements, constraints, and information column.
To review the current Printer Setup defaults, print the Configuration
page from the Printer Control Panel.
B–2
Xerox DocuColor 2006