Xerox 2006NPC - DocuColor Color Laser User Manual page 490

24. Problem Solving
Invalid for Stack.
Remove papers from High Cap.
Remove papers from Sorter.
Sort and Stack are selected.
Load originals in Document
Feeder.
Sorter is available up to 10 sets.
Sorter malfunction.
Stack is available up to 30
copies.
Stack is full. Remove papers.
Stacker is full.
24-42
The selections (such as paper size) you made for the
job are not valid for stacking. Redirect the job to the
top tray or change the selections so the job may be
sent for stacking.
500 sheets are in the high capacity bin. Remove the
sheets from the high capacity bin and continue
copying.
The capacity of the Exit Tray (bin 1) or other bins has
been reached. Remove the sheets from the bins and
continue copying.
The Sorter/Stacker is ready to receive the job. Load
the originals in the Document Feeder and run the
job.
The desired number of sets exceeds the sorting limit.
Decrease the number to 10 and run the remaining
sets as part of another job.
A problem has occurred in the Sorter. Examine the
job specifications and any output. Rerun the job, if
possible. If you are unable to proceed, call for
service.
The capacity of the output bins (30 sheets of 20 lb/
64 gsm paper) has been exceeded. Remove the
paper from the bins and continue running the job.
Bin capacity has been reached. Remove the sheets
from the bins and continue copying
Bin capacity has been reached in the high capacity
bin. Remove the sheets from the high capacity bin
and continue copying.
Sorter/Stacker Error messages
Xerox DocuColor 2006