Accessing The Computer Setup (F10) Utility - HP Z210 Maintenance And Service Manual

Convertible mini tower workstation
Hide thumbs Also See for Z210:
Table of Contents

Advertisement

Accessing the Computer Setup (F10) Utility

To access the Computer Setup (F10) Utility menu:
1.
Power on or restart the computer.
2.
As the display first becomes active, press F10.
If you do not press
then on, and press
starting if you miss the opportunity to press F10.
3.
Select the language from the list and press Enter.
In the Computer Setup (F10) Utility menu, five headings are displayed: File, Storage, Security,
Power, and Advanced.
4.
Use the left and right arrow keys to select the appropriate heading, use the up and down arrow
keys to select an option, and then press Enter.
5.
Choose from the following:
To apply and save changes, select File > Save Changes, and then select F10=YES.
To remove changes you have made, select Ignore Changes and then select F10=YES.
To reset to factory settings, select File > Default Setup > Restore Factory Settings as
Default. Press
restores the original factory system defaults.
NOTE:
Help screens (accessed by pressing F1) are available for many menus in the Computer Setup
(F10) Utility.
CAUTION:
changes to CMOS memory. A loss of power could corrupt the CMOS memory. After you exit the F10
Setup screen, you can disconnect power from the computer.
ENWW
F10
quickly enough at the appropriate time, try again. Turn the computer off,
F10
again to access the utility. You can also press
to accept the changes, and then select Apply Defaults and Exit. This
F10
Do not power off the computer while the ROM is saving the Computer Setup (F10) Utility
Ctrl + Alt + Delete
The Computer Setup (F10) Utility
before
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents