Optical Disk Drive (Desktop Configuration); Removing An Optical Drive (Desktop Configuration) - HP Z210 Maintenance And Service Manual

Optical disk drive (desktop configuration)

This section describes how to remove and install an optical disk drive in the workstation desktop
configuration. For instructions on removing and installing optical disk drives in the workstation mini-
tower configuration, see

Removing an optical drive (desktop configuration)

1. Disconnect power from the system (see
2.
Remove the side access panel (see
3.
Remove the front bezel (see
4. Disconnect the data (1) and power (2) cables from the drive, as shown in the following figure.
(The connector colors might be different than shown in the following figure.)
Figure 5-15
ENWW
Optical disk drive (mini-tower configuration) on page
Removing the side access panel on page
Removing the front bezel on page
Disconnecting the optical drive cables
Predisassembly procedures on page
Removing and installing components
71.
62),
65).
68).
75