Table of Contents
Advertisement
4
Computer Setup (F10) Utility
Computer Setup (F10) Utilities
Access the BIOS Setup Utility by pressing the F10 button during startup. Use Computer Setup (F10)
Utility to do the following:
●
●
●
●
●
●
●
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system.
To access the Computer Setup Utilities menu, complete the following steps:
1.
2.
3.
28
Chapter 4 Computer Setup (F10) Utility
Downloaded from
www.Manualslib.com
Change factory default settings.
Set the system date and time.
Set, view, change, or verify the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
View processor and memory settings
Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or
USB media.
Run hard drive self-tests.
Establish a supervisor password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
Turn on or restart the computer.
As soon as the computer is turned on, press
system to enter Computer Setup. Press
NOTE:
If you do not press
again press
F10
before the unit boots to the operating system to access the utility.
The Computer Setup Utility screen is divided into menu headings and actions.
Five menu headings appear on the Computer Setup Utility screen:
●
Main
●
Advanced
●
Boot
manuals search engine
F10
before the system boots to the operating
Enter
to bypass the title screen, if necessary.
F10
at the appropriate time, you must restart the computer and
Advertisement
Table of Contents
Troubleshooting
