Expansion card
PCIe I/O slots may supply less bus bandwidth than what is physically defined for the slot.
Expansion card slot description
NOTE:
The x1, x4, and x16 designators describe the mechanical length of the slot. The number in
parentheses lists the number of electrical PCIe lanes routed to the expansion slot. For example, x16(4)
means that the expansion slot is mechanically a x16 length connector, with four PCIe lanes connected.
Use the following table to determine PCIe card compatibility.
Table 5-6
Slot
1
2
3
4
5
Removing an expansion card
To remove an expansion card:
1.
Disconnect power from the workstation (see
2.
Remove the side access panel (see
90
Chapter 5 Replacing components
HP x210 CMT Workstation PCIe compatibility matrix
Mechanical compatibility
x8 connector
x16 connector
x1 connector
x16 connector
x1 connector
Electrical lanes available
4
16
1
4
1
Predisassembly procedures on page
Removing the side access panel on page
62).
65).
ENWW