This section presents memory module (DIMM) configuration information and removal/installation
Supported DIMM configurations
The workstation supports these DIMM configurations:
Four DIMM slots
Memory configuration from 1 GB to 32 GB
No support for mirroring
No support for DIMM sparing
Error checking and correcting (ECC) and non-ECC DIMMs are supported.
DIMM installation guidelines
Install only HP-approved DDR3 DIMMs.
workstation. Because third-party DIMMs might not be electrically or thermally compatible, they are
not supported by HP.
For ECC DIMMs, use only industry-standard ECC unbuffered DIMMs. See
Do not intermix non-ECC memory DIMMs with ECC memory DIMMs.
DIMM installation order
Review the following to determine the correct installation order for DIMMs.
HP ships only DIMMs that are electrically and thermally compatible with this
to find which DIMMs are compatible with the workstation.
DIMM load order
Removing and installing components